Purge Web Caches in MicroStrategy Web

By executing the mstr server by embedding the blue text below with admin privileges purges web server cache.
https://mstrserver.com/MicroStrategy/asp/Admin.aspx//mstrWebAdmin/?pg=purgecaches

MicroStrategy Web and Web Universal caches various properties that are related to the user, project, or the MicroStrategy Intelligence Server. This helps in reducing the response time for every request by delivering the properties from a closer location than the original MicroStrategy Intelligence Server. In majority of the cases, the default caching properties should be applicable to the business intelligence infrastructure.

There are 3 types of caches used in MicroStrategy Web. These are described below:

Session Cache - Specific to a user and exists only while the user is logged in. This cache is deleted when the user logs out or if there's no activity for a specified timeout interval. The default value for a timeout is 1200 seconds or 20 minutes.
Project Cache - Specific to a project that is registered with the MicroStrategy Intelligence Server 9.x. The default value for a timeout is 86400 seconds or 24 hours. The default value for a refresh time is 86400 seconds or 24 hours.
Server Cache - Specific to a MicroStrategy Intelligence Server 9.x. The default value for a timeout is 86400 seconds or 24 hours. The default value for a refresh time is 86400 seconds or 24 hours.

Restarting the Web or Application Server will also purge caches. It is also possible to purge caches without restarting the server or waiting for the cache timeout settings to be reached. In MicroStrategy Web GUI Interface, it is possible for a web administrator user to purge caches immediately.

Perform the following steps to delete the web cache:

Load the MicroStrategy Web Administrator page.
In MicroStrategy Web .Net version:
http://WebServerName/MicroStrategy/asp/Admin.aspx

In MicroStrategy Web Universal:

http://AppServerName:Port/MicroStrategy/servlet/mstrWebAdmin

At the end of the URL, append ?pg=purgecaches and press Enter. The following page will appear:
Select the cache to be purged and it will immediately be cleared.

Comments

Microstrategy Custom number formatting symbols

Custom number formatting symbols If none of the built-in number formats meet your needs, you can create your own custom format in the Number tab of the Format Cells dialog box. Select Custom as the Category and create the format using the number format symbols listed in the table below. Each custom format can have up to four optional sections, one each for: Positive numbers Negative numbers Zeros Text Each section is optional. Separate the sections by semicolons, as shown in the example below: #,###;(#,###);0;"Error: Entry must be numeric" For more examples, see Custom number formatting examples . To jump to a section of the formatting symbol table, click one of the following: Numeric symbols Character/text symbols Date and time symbols Text color symbols Currency symbols Conditional symbols Numeric symbols For details on how numeric symbols apply to the Big Decimal data type, refer to the Project Design Guide . ...

Case functions Microstrategy

Ca se functions Microstrategy Case functions return specified data in a SQL query based on the evaluation of user-defined conditions. In general, a user specifies a list of conditions and corresponding return values. Case This function evaluates multiple expressions until a condition is determined to be true, then returns a corresponding value. If all conditions are false, a default value is returned. Case can be used for categorizing data based on multiple conditions. This is a single-value function. Syntax Case ( Condition1 , ReturnValue1 , Condition2 , ReturnValue2 ,..., DefaultValue ) Example Case(([Total Revenue] < 300000), 0, ([Total Revenue] < 600000), 1, 2) sum(Case (Day@DESC in (“Sat”,”Sun”), Sales, 0) {~+} Sum(Case(Category@DESC In("Books","Electronics"),Revenue,0)){~+} CaseV (case vector) CaseV evaluates a single metric and returns different values according to the results. It can be used to perfo...

MicroStrategy URL API Parameters

MicroStrategy URL Structure The following table summarizes the root URL structure used for every request to MicroStrategy Web. Environment Main Application URL Administration URL J2EE http://webserver/MicroStrategy/servlet/mstrWeb http://webserver/MicroStrategy/servlet/mstrWebAdmin .NET http://webserver/MicroStrategy/asp/Main.aspx http://webserver/MicroStrategy/asp/Admin.aspx Every request sent to MicroStrategy Web calls a central controller. Parameters are appended to Main.aspx or mstrWeb (in a .NET and J2EE environment, respectively) to indicate to the controller how the request should be internally forwarded and handled. The following examples show a URL for accessing a MicroStrategy folder when the user does not have an existing session. The URL contains not only the parameters needed to connect to MicroStrategy Web, but also the parameters needed to log on and create a session. J2EE environment: <a href="http:...

Microstrategy Report Services documents and dashboards

Microstrategy Report Services documents vs Dashboards A MicroStrategy Report Services document displays data coming from multiple reports, with the data laid out and designed in presentation-quality format. Most data on a document is from one or more underlying datasets. A dataset is a standard MicroStrategy report. Other document components that do not originate from the dataset, such as static text used for a title or heading, page numbers, and images, are added by the document's designer and are stored in the document's definition. A Report Services (RS) dashboard is a special type of document. An RS dashboard is commonly only one page long, is intended to be viewed online, and usually provides interactive features that let analysts change how they view the dashboard’s data, as well as what data they are viewing. A broad selection of widgets and a wide variety of formatting options allow you to design a customized, interactive dashboard. Both documents and RS dashb...

Custom Tooltips in Microstrategy developer and Web

Custom Tooltips in Microstrategy developer and Web The following table describes the macros you can use to customize graph tooltips in both MicroStrategy Developer and MicroStrategy Web: Macro Information Displayed {&TOOLTIP} All relevant labels and values associated with a graph item. {&GROUPLABEL} Name of the graph item's category. This value is often the graph item's attribute element information, as attributes are commonly used as the categories of graph reports. {&SERIESLABEL} Name of the graph item’s series. This value is often the graph item's metric name information, as metrics are commonly used as the series of graph reports. {&VALUE} The value of a given data point. {&XVALUE} The X-value of a data point. Only applicable to Bubble charts and Scatter plots. {&YVALUE} The Y-value of a data point. Only applicable to Bubble charts and Scatter plots. {&ZVALUE} The Z-value of a data point. Only applicable to Bubble charts and Scatter plots. {...

Microstrategy document/dashboard applying selections as filters or slices

Applying selections as filters or slices In a Microstrategy Document the selections a user makes in a selector can either filter or slice the data in the target: Filtering means that the data for the current selection is calculated only when it is requested by the user. The selections are used to filter the underlying dataset before the metric values are aggregated at the level of the Grid/Graph that is displayed in the document. If the source attribute is not included in the Grid/Graph, the metric values from all the selected elements are aggregated and shown at the level specified in the Grid/Graph. All metric condition selectors (which filter metric values or ranks) and selectors that target other selectors filter data by default. You cannot change them to slicing selectors. Slicing means that the data for each available item in the selector is calculated in advance when the document is first displayed. Selections made while ...

Transaction Services - Configure Transactions

Configure Transactions in MSTR Web Transaction Services-enabled document displayed on an iPhone, iPad, or Android device can allow users to insert/update/delete data in to the database, using the options in the Configure Transactions Editor. To do so, you must link a Transaction Services report to a grid or to text fields in a panel stack. If the document is being displayed on an iOS device, you can link the report to the cells of a transaction table. Data from the input objects defined in the Transaction Services report is displayed in the grid, text fields, or cells for users to edit. Prerequisites: Ø You must have the Web Configure Transaction privilege assigned by MSTR user admin. Ø Create the Transaction Services report (usually a grid report) you want to link to the grid, text fields, or transaction table cells. Make sure that the Transaction Services report must contain the input object for each value you w...

mstrio – Python and R wrappers for the MicroStrategy

mstrio – Python and R wrappers for the MicroStrategy REST APIs Connecting to MicroStrategy Create a connection to the Intelligence Server using Connection() and  connect() in Python and R, respectively. Required arguments for the   Connection()  function are the URL for the MicroStrategy REST API server, MicroStrategy Intelligence Server username and password, as well as the MicroStrategy project name. By default, the  connect()  function anticipates your MicroStrategy Intelligence Server username and password. LDAP authentication is also supported. Use the optional argument  login_mode=16  in the  connect()  function for LDAP authentication. Extract data from cubes and reports To extract data from MicroStrategy cubes and reports, use the get_cube()  and  get_report() functions. Use...

Types of filters in Microstrategy

Types of filters in Microstrategy Below are the types of filters: 1. Attribute qualification filter These types of qualifications restrict data related to attributes on the report. a) Attribute form qualification Filters data related to a business attribute’s form(s), such as ID or description. • For example, the attribute Customer has the forms ID, First Name, Last Name, Address, and Birth Date. An attribute form qualification might filter on the form Last Name, the operator Begins With, and the letter H. The results show a list of customers whose last names start with the letter H. b) Attribute element list qualification Filters data related to a business attribute’s elements, such as New York, Washington, and San Francisco, which are elements of the attribute City. • For example, the attribute Customer has the elements John Smith, Jane Doe, William Hill, and so on. An attribute element list qualification can filter data to display only those customer...

Microstrategy Dossiers explained

Microstrategy Dossiers With the release of MicroStrategy 10.9, we’ve taken a leap forward in our dashboarding capabilities by simplifying the user experience, adding storytelling, and collaboration.MSTR has evolved dashboards to the point that they are more than dashboards - they are interactive, collaborative analytic stories . Ultimately, it was time to go beyond dashboards, both in concept and in name, and so the've renamed VI dashboards to ‘ dossiers ’. Dossiers can be created by using the new Desktop product or Workstation or simply from the Web interface which replaces Visual Insights. All the existing visual Insights dashboards will be converted to Dossiers With MicroStrategy 10.9, there was an active focus on making it easier to build dashboards for the widest audience of end users. To achieve this, some key new capabilities were added that make it easier to author, read, interact and collaborate on dashboards ...

Microstrategy Analytics

Search This Blog