Skip to main content

Connection Mapping in Microstrategy

Connection Mapping in Microstrategy

A connection map in MicroStrategy is a link between a MicroStrategy user, a database connection, and a database login. 

It is used to apply database (row-level) security to a MicroStrategy user. Connection mapping allows administrators to assign a user or group in the MicroStrategy system to a specific login ID on the data warehouse RDBMS. The mappings are typically used to take advantage of one of several RDBMS data security techniques (security views, split fact tables by rows, split fact tables by columns) that architects may have already created. When a database connection map is modified, MicroStrategy Intelligence Server needs to be refreshed to recognize the changes.

Connection mapping is useful when MicroStrategy users must be differentiated from each other at the data warehouse level or when they must be directed to separate data warehouses. 

Below are the  two scenarios are described:.
  • Connecting to the data warehouse using different database logins:
    In this scenario, the project, database instance, and data warehouse are the same for the users in two groups, but the connection mapping specifies different database logins for each group. For example, the CEO of the company has a login that allows access to all data, while all other users have a login that allows limited access to data. In the diagram below, the two different logins used are "MSTR users" and "CEO".
     
  • Connecting to different data warehouses using the same project:
    In this scenario, the project, database instance, and database login are the same, but the connection mapping specifies different database connections (and therefore, different DSNs) for the two groups. In order for the project to work with both data warehouses, they must have the same structure. This is applicable in an environment where there are two data warehouses—for example, one with domestic data and another with foreign data—and users must be directed to one or the other based on the user group to which they belong when they log in to MicroStrategy. In the diagram below, the two different database connections used are "US " and "Europe". Although the data warehouse login ID for both the database connections is "MSTR users", within MicroStrategy the users belong to two different groups - 'US users' and 'Europe users'.
     
Labels:

Comments

Post a Comment

Popular posts from this blog

Microstrategy Custom number formatting symbols

Custom number formatting symbols If none of the built-in number formats meet your needs, you can create your own custom format in the Number tab of the Format Cells dialog box. Select  Custom  as the Category and create the format using the number format symbols listed in the table below. Each custom format can have up to four optional sections, one each for: Positive numbers Negative numbers Zeros Text Each section is optional. Separate the sections by semicolons, as shown in the example below: #,###;(#,###);0;"Error: Entry must be numeric" For more examples, see  Custom number formatting examples . To jump to a section of the formatting symbol table, click one of the following: Numeric symbols Character/text symbols Date and time symbols Text color symbols Currency symbols Conditional symbols Numeric symbols For details on how numeric symbols apply to the Big Decimal data type, refer to the  Project Design Guide . ...
4 comments
Read more

Prompt-in-prompt(Nested Prompts) in Microstrategy

Prompt-in-prompt(Nested Prompts) in  Microstrategy Nested prompts allows you to create one prompt based on the other and other bases on another, nested prompts allows us to prompt the highest level(Like year) to middle level(like Quarter, then to the low level(like Month). Here you can see how to  create a 3-level deep nested prompt that will prompt the user to select a year, then a quarter within that year, then a month within that quarter. Prompt-in-prompt is a feature in which the answer to one prompt is used to define another prompt. This feature is only implemented for element list prompts . The following procedure describes how to achieve this: Create the highest level filter. This is a filter which contains a prompt on an attribute element list. Create a filter on the attribute "Year." Click "prompt on attribute element list" and click "Next" through the rest of the screens to accept the default values. Do not set any additio...
3 comments
Read more

Apply or Pass-through functions in Microstrategy

Ap ply (Pass-Through) functions MSTR Apply functions provide access to functions or syntactic constructs that are not standard in MicroStrategy but are provided by various RDBMS systems.. Syntax common to Apply functions Apply Function Name   ("expression with placeholders", Arg1, Arg2, Arg3, …ArgN) where: Apply Function Name  – is a generic name used for the predefined pass-through functions described above expression with placeholders  – is the string describing the actual expression or syntax that the engine uses while generating the SQL and which is sent to the RDBMS. The placeholders are represented by #0, #1, and so on. "#" is a reserved character for MicroStrategy. Arg  – is an argument that replaces the parameter markers in the pattern. Arg1 replaces #0, Arg2 replaces #1, and so on. There are   five  pre-defined Apply functions to replace regular, predefined functions of the same type. For more details, cli...
6 comments
Read more

Case functions Microstrategy

Ca se functions Microstrategy Case functions return specified data in a SQL query based on the evaluation of user-defined conditions. In general, a user specifies a list of conditions and corresponding return values. Case This function evaluates multiple expressions until a condition is determined to be true, then returns a corresponding value. If all conditions are false, a default value is returned.  Case  can be used for categorizing data based on multiple conditions. This is a single-value function. Syntax Case ( Condition1 ,  ReturnValue1 ,  Condition2 , ReturnValue2 ,...,  DefaultValue ) Example Case(([Total Revenue] < 300000), 0, ([Total Revenue] < 600000), 1, 2) sum(Case (Day@DESC in (“Sat”,”Sun”), Sales, 0) {~+} Sum(Case(Category@DESC In("Books","Electronics"),Revenue,0)){~+} CaseV (case vector) CaseV  evaluates a single metric and returns different values according to the results. It can be used to perfo...
3 comments
Read more

Microstrategy "Error type: Odbc error. Odbc operation attempted

 "Error type: Odbc error. Odbc operation attempted: SQLExecDirect. [HYT00:0: on SQLHANDLE] [MicroStrategy][ODBC Oracle Wire Protocol driver]Timeout expired" is shown when executing reports from Web When users are trying to execute some reports in MicroStrategy web in particular, they may receive the Error “SQL Generation Complete Index out of range” and “Timeout expired” error as shown below: Possible Causes: One possible cause is that the MicroStrategy Intelligence Server using a cached database connection that was already dropped by the RDBMS. To resolve this: Admin should delete the database connection caches and create a new DSNs in case they are sharing DSNs to connect to different databases. In addition, change the settings for the ‘Connection lifetime’ and the ‘Connection idle time out’.  Follow the steps below to perform the mentioned changes and verify the report after each step and some of the settings require i-server r...
4 comments
Read more

Microstrategy Caches explained

Microstrategy Caches Improving Response Time: Caching A  cache is a result set that is stored on a system to improve response time in future requests.  With caching, users can retrieve results from Intelligence Server rather than re-executing queries against a database. To delete all object caches for a project 1 In Developer, log into a project. You must log in with a user account that has administrative privileges. 2 From the  Administration  menu, point to  Projects , and then select  Project Configuration . The Project Configuration Editor opens. 3 Expand  Caching , expand  Auxiliary Caches , then select  Objects . To delete all configuration object caches for a server 1 Log in to the project source. 2 From the  Administration  menu in Developer, point to  Server , and then select  Purge Server Object Caches . 4 Click  Purge Now . To purge web cache follow the steps in the link ...
3 comments
Read more

Bursting file subscriptions Microstartegy

Bursting file subscriptions: Delivering  parts of reports across multiple files: Large MicroStrategy reports and documents are often broken up into separate pages by attributes. In a similar way, with Distribution Services, you can split up, or burst, a report or document into multiple files. When the subscription is executed, a separate file is created for each element of each attribute selected for bursting. Each file has a portion of data according to the attributes used to group data in the report (page-by axis) or document (group-by axis). Ex:, you may have a report with information for all regions. You could place Region in the page-by axis and burst the file subscription into the separate regions. This creates one report file for each region. As a second ex:, if you choose to burst your report using the Region and Category attributes, a separate file is created for each combination of Region and Category, such as Central and Books as a report, Central and Ele...
1 comment
Read more

Settings for Outer Join between metrics in MicroStrategy

Settings for Outer Join between metrics in MicroStrategy MicroStrategy adopts multi-pass logic to determine the execution plan for a report. This means that every metric is evaluated in separate SQL passes. Outer Joins come into play when MicroStrategy Engine merges the results from all SQL passes into one report. For a multi-pass report, different Outer Join behaviors can give the user completely different results. In addition, report metrics can be of different types which can, in some cases, influence the result of the outer join. In MicroStrategy, there are two settings that users can access to control Outer Join behavior : Formula Join Type and Metric Join Type . Metric Join Type: VLDB Setting at Database Instance Level Report and Template Levels Report Editor > Data > Report Data Options Metric Level   Metric editor > Tools > Metric Join Type Control Join between Metrics Formula Join Type: Only at Compound/Split...
Post a Comment
Read more

Microstrategy Dossiers explained

Microstrategy  Dossiers With the release of MicroStrategy 10.9, we’ve taken a leap forward in our dashboarding capabilities by simplifying the user experience, adding storytelling, and collaboration.MSTR has  evolved dashboards to the point that they are more than dashboards - they are  interactive, collaborative analytic stories . Ultimately, it was time to go beyond dashboards, both in concept and in name, and so  the've  renamed VI dashboards to  ‘ dossiers ’.  Dossiers can be created by using the new Desktop product or Workstation or simply from the Web interface which replaces Visual Insights. All the existing visual Insights dashboards will be converted to Dossiers   With MicroStrategy 10.9, there was an active focus on making it easier to build dashboards for the widest audience of end users. To achieve this, some key new capabilities were added that make it easier to author, read, interact and collaborate on dashboards ...
7 comments
Read more

Control the display of null and zero metric values

Show   Control the display of null and zero metric values in a grid report You can determine how to display or hide rows and columns in a grid report that consist only of null or zero metric values. You can have MicroStrategy hide the rows and columns in the following ways: Hide rows and columns that consist only of null metric values Hide rows and columns that consist only of zero metric values Hide rows and columns that consist only of null or zero metric values (default) Once you have defined how MicroStrategy hides null and zero metric values in the grid, you can quickly show or hide the grid using the Hide Nulls/Zeros option in the Data menu, as described below, or by clicking the  Hide Nulls/Zeros  icon  in the Data toolbar. To determine how null and zero metric values are displayed or hidden in a grid report Open the report in Edit mode. From the  Tools  menu, select  Report Options . The Report Options...
Post a Comment
Read more