Create an alert-based subscription in MicroStrategy Distribution Services

Create an alert-based subscription in MicroStrategy Distribution Services on Web

Subscription to a report or Report Services document which will be executed when a certain conditional threshold is met based on another executing report. For example, a scheduled report executes which shows the Revenue by day for the past week. If the Revenue on any one day falls below a certain value, a subscription to another report or Report Services document can be triggered and delivered to a recipient. An alert based subscription can only be created directly on a report; however, another report or Report Services document can be delivered when the alert based subscription is triggered.

Note: you need a grid report to create an alert and you cannot create if you want to create on a document with text boxes.

The following example will walk through the basic steps on how to setup a subscription based on an alert like this:

Follow the brief steps below:

In MicroStrategy Web, edit or execute a report.
Right-click on the metric header to apply the condition or threshold and select 'Alerts':
Specify the conditions to meet for the delivery to be triggered in the filter editor:
Expand the Delivery Settings section.
Specify the desired delivery options including recipient address, subscription name, delivery format, compression options and the schedule to run the report and check the condition.
To deliver the same report when the condition is met, select the 'Send all data. Format cells that meet condition' option. To deliver a different report or document when the condition is met, select the 'Send different report or document' and select the report/document to deliver:
Click OK to save the alert subscription.

Comments

Tanya MehraMay 29, 2021 at 8:29 AM
This comment has been removed by the author.
ReplyDelete
Replies
LavanyaDecember 10, 2021 at 11:11 PM
your valuable information and time. Please keep updating.
Learn Micro Strategy Online
Micro Strategy Dossier Training
ReplyDelete
Replies
psychorollercoasterMarch 9, 2026 at 12:48 AM
You must indulge in a contest for one of the greatest blogs over the internet. Ill suggest this web site! Strategy Leap
ReplyDelete
Replies

Add comment

Microstrategy Custom number formatting symbols

Custom number formatting symbols If none of the built-in number formats meet your needs, you can create your own custom format in the Number tab of the Format Cells dialog box. Select Custom as the Category and create the format using the number format symbols listed in the table below. Each custom format can have up to four optional sections, one each for: Positive numbers Negative numbers Zeros Text Each section is optional. Separate the sections by semicolons, as shown in the example below: #,###;(#,###);0;"Error: Entry must be numeric" For more examples, see Custom number formatting examples . To jump to a section of the formatting symbol table, click one of the following: Numeric symbols Character/text symbols Date and time symbols Text color symbols Currency symbols Conditional symbols Numeric symbols For details on how numeric symbols apply to the Big Decimal data type, refer to the Project Design Guide . ...

Slowly Changing Dimension Types 0, 4, 5, 6 and 7

Slowly Changing Dimension Types 0, 4, 5, 6 and 7 Ralph introduced the concept of slowly changing dimension (SCD) attributes in 1996. Dimensional modelers, in conjunction with the business’s data governance representatives, must specify the data warehouse’s response to operational attribute value changes. Core SCD approaches: Type 1 (overwrite), Type 2 (add a row), and Type 3 (add a column). Since legibility is a key component of the Kimball mantra, we sometimes wish Ralph had given these techniques more descriptive names, such as “overwrite” instead of “type 1.” But at this point, the SCD type numbers are part of our industry’s vernacular. We have written about more advanced SCD patterns, such as the 2005 article entitled “ Slowly Changing Dimensions are Not Always as Easy as 1, 2, 3. ” However, we’ve not consistently named the more advanced and hybrid techniques. With the third edition of The Data Warehouse Toolkit (Wiley, 201...

Internationalization Design Technics

Microstrategy Internationalization Design Technics MicroStrategy supports data internationalization through two different techniques. You can either provide translated data through the use of extra tables and columns, or you can provide separate databases to store your translated data. These techniques are described below: You can support data internationalization in your database by using separate tables and columns to store your translated data. You can use various combinations of tables and columns to support and identify the translated data in your database. To support displaying the name of each month in multiple languages, you can include the translated names in a separate column, one for each required language, within the same table. Each column can use a suffix to identify that the column contains translated data for a certain language. The same LU_MONTH_OF_YEAR table with translated data for the Spanish and German langua...

Custom Subtotal Displays in MicroStrategy

Defining custom subtotal displays in MicroStrategy By default, when users apply subtotals in a report, the name of the subtotal is displayed in the subtotal line items that appear in the report. Users can use custom subtotals to give more control over the characteristics of a subtotal. Custom subtotals allow users to define custom subtotal line items that appear on the reports U sers can make the subtotal name dynamic by typing special characters in the subtotal name field as listed in the following table. Character Description #A The name of the attribute under which the subtotal appears. #P The name of the attribute to the left of, or above the attribute under which the subtotal appears. #0 All the forms of the parent element. #1 The first form of the parent element reading from left to right or from top to bottom. #2 The second form of the parent element reading from left to right or from top to bottom. #3 The third form of th...

Configure Connection Mapping in Microstrategy

Configure Connection Mapping in Microstrategy The following steps demonstrate the second scenario where two different data warehouses are used within the same project: Create two different database connections - One that points to the data warehouse for the European users and the other that points to the data warehouse for USA users as shown below: Select Europe as the default database connection for the database Instance as seen below: Go to P...

Sort by metric subtotals and attribute elements together in Microstrategy

Sort by metric subtotals and attribute elements together in Microstrategy Users may observer that when creating a report that contains advance sorting with a metric that contains subtotals the report results appear to be only sorted by the metric values specified. Even if a sort is specified for the attribute elements on the report, the results in the report appear as if the attribute sort was not defined. In the screenshot below, the results for a report are shown where the Advance Sorting option 'Sort metrics hierarchically using: Total' is selected. For this report, a second sort is defined on the Customer Gender - 'DESC' form, users would notice that the ordering of the this attribute is not consistent: The sort definition for the report is shown below: CAUSE: When the option to 'Sort metrics hierarchically using: Total' option is selected, the MicroStrategy Engine first sorts the results based on the Total values, and then sorts th...

Prompt-in-prompt(Nested Prompts) in Microstrategy

Prompt-in-prompt(Nested Prompts) in Microstrategy Nested prompts allows you to create one prompt based on the other and other bases on another, nested prompts allows us to prompt the highest level(Like year) to middle level(like Quarter, then to the low level(like Month). Here you can see how to create a 3-level deep nested prompt that will prompt the user to select a year, then a quarter within that year, then a month within that quarter. Prompt-in-prompt is a feature in which the answer to one prompt is used to define another prompt. This feature is only implemented for element list prompts . The following procedure describes how to achieve this: Create the highest level filter. This is a filter which contains a prompt on an attribute element list. Create a filter on the attribute "Year." Click "prompt on attribute element list" and click "Next" through the rest of the screens to accept the default values. Do not set any additio...

The logical table size calculation in Microstrategy

The logical table size calculation in Microstrategy The logical table size is an integer number that represents the granularity or level of aggregation of a particular table. It is called 'logical' because it is not related to the physical size of the tables (number of rows). It is calculated according to the attribute IDs that are present in the table and their level in the system hierarchy. Even though, the number does not reveal the actual number of rows in the table, it is an accurate way of measuring a table size without having to access its contents. MicroStrategy Engine utilizes an algorithm based on attribute keys to calculate the Logical Table Size (LTS): Given the following tables: The algorithm that calculates the table sizes performs the following steps: Calculate the number of levels per hierarchy: Hierarchy 1: 3 Hierarchy 2: 4 Calculate each attribute individual weight according to the level in the hierarchy (level in hierarchy/number of ...

OLAP features in Microstrategy

OLAP features in Microstrategy MSTR OLAP Services uses Intelligent Cube Technology—an in-memory version of report data that can 1 About MicroStrategy OLAP Services can be manipulated by the MicroStrategy Analytical Engine. MicroStrategy Desktop, Web, and Office users can slice and dice data in reports within Intelligent Cubes without having to re-execute SQL against the data warehouse. Many of the standard OLAP features that MicroStrategy provides out of the box, such as: Page-by Pivoting Sorting Subtotals Banding Aliasing Outline mode Thresholds etc.. With an OLAP Services license, user can perform additional OLAP analysis, using the following features: Displaying data on the fly: dynamic aggregation, page Creating metrics on-the-fly: derived metrics, Defining attribute elements on-the-fly: derived elements, Filtering data on the fly: view filters and metric filters, Importing data as an Intelligent Cube

Custom formatting Microstrategy metric format into 1M 2M etc

Custom formatting metric values of 1,100,000 into a 1.1 million 1.1M type format In addition to the the pre-defined options for metric formatting, MicroStrategy supports custom formatting. The MicroStrategy Tutorial project is used to explain how users can customize numbers from "1,000,000" to a "1.00" format. Consider a report containing row data values greater than a million, as illustrated below: To format these metric values to use a decimal (i.e., 1.1) instead of showing all the numerals, right-click on the metric (' Revenue ' , for this example) and select Formatting > Revenue Values , as shown below: Select " Custom " as a category in the Number tab and enter ' 0,,.## ' (without quotation marks), as shown below: Confirm that the format applied properly:

Microstrategy Analytics

Search This Blog