Skip to main content

Microstrategy Custom number formatting symbols

Custom number formatting symbols

If none of the built-in number formats meet your needs, you can create your own custom format in the Number tab of the Format Cells dialog box. Select Custom as the Category and create the format using the number format symbols listed in the table below. Each custom format can have up to four optional sections, one each for:
  • Positive numbers
  • Negative numbers
  • Zeros
  • Text
Each section is optional. Separate the sections by semicolons, as shown in the example below:
#,###;(#,###);0;"Error: Entry must be numeric"
For more examples, see Custom number formatting examples.
To jump to a section of the formatting symbol table, click one of the following:

Numeric symbols

For details on how numeric symbols apply to the Big Decimal data type, refer to the Project Design Guide.
Symbol
General
General
Displays the number in General format, that is, no specific number format.
0
Digit placeholder.
  • If the number contains fewer digits than the format contains placeholders, the number is padded with zeros. For example, the format code 00000 displays the number 12 as 00012.
  • Use this placeholder for mandatory zeros.
  • If there are more digits to the right of the decimal point than placeholders in the format, the decimal portion is rounded to the number of places specified by the placeholders.
  • If there are more digits to the left of the decimal point than the placeholders in the format, the extra digits are retained.
  • If the format contains zeros to the left of the decimal point, numbers less than one are displayed with a zero to the left of the decimal point.
#
Digit placeholder.
  • This digit placeholder displays only significant digits and does not display insignificant zeros. For example, the format code ##.## displays the number 0025.360 as 25.63.
  • Use this placeholder to indicate optional zeros.
  • If there are more digits to the right of the decimal point than placeholders in the format, the decimal portion is rounded to the number of places specified by the placeholders.
  • If there are more digits to the left of the decimal point than the placeholders in the format, the extra digits are retained.
  • If the format contains only number signs (#) to the left of the decimal point, numbers less than one are displayed beginning with a decimal point. For example, the format #.00 will display the number 0.43 as .43.
?
Digit placeholder.
  • This digit placeholder adds spaces for insignificant zeros on either side of the decimal point so that decimal points align when formatted with a fixed-width font.
  •  You can also use question marks (?) for fractions that have varying numbers of digits.
%
Displays the number as a percentage, by multiplying the number by 100 and appending the percent character (%).
,
(comma)
Thousands separator.
  • If the format contains commas separated by number signs (#) or zeros, a thousands separator is used in the formatted text.
    The actual thousands separator used depends on the session locale.
  • A comma following a placeholder scales the number by a thousand. For example, using 0, scales the number by 1000, so that 10,000 displays as 10.
.
(period)
Decimal separator.
The actual decimal separator used depends on the session locale.

E-
Scientific notation.
  • If the format contains a scientific notation symbol to the left of a 0 or # placeholder, the number is displayed in scientific notation and an E or
  • The number of 0 and # placeholders to the right of the decimal determines the number of digits in the exponent.
  • E- and e- place a minus sign by negative exponents.
  • E+ and e+ place a minus sign by negative exponents and a plus sign by positive exponents.
       Return to list

Character/text symbols

Symbol
Description
"text"
Displays the text inside the quotation marks. Even if the text is a valid formatting symbol, it is treated as literal text if it appears within quotes.
Use quotation marks around any character that is not a formatting symbol, including a space, the dollar sign ($), minus sign (-), slash (/), exclamation mark (!), ampersand (&), tilde (~), curly brackets ({ }), equals sign (=), less than and greater than signs (< >), and the caret (^). This ensures that the text appears correctly in both MicroStrategy Developer and MicroStrategy Web.
:
In a date/time format, the colon (:) does not need to be enclosed in double quotation marks (" "). However, to display it in a numeric format, it must be enclosed in quotes. For example, if you have an integer that must be displayed as 12:34:56, the correct format is "##":"##":"##".
*
The asterisk (*) repeats the next character until the width of the column is filled. Only one asterisk can be used in each format section.
_
The underline ( _ ) skips the width of the next character. For example, to make negative numbers surrounded by parentheses align with positive numbers, you can include the format _). Positive numbers will then skip the width of a parenthesis.
       Return to list

Date and time symbols

Symbol
Description
m
Month number.
Displays the month as digits without leading zeros, such as 1.
Can also represent minutes when used with the h or hh formats.
mm
Month number.
Displays the month as digits with leading zeros, as in 01.
Can also represent minutes when used with the h or hh formats.
mmm
Month abbreviation, such as Jan.
mmmm
Month name, such as January.
d
Day number.
Displays the day as digits with no leading zeros, such as 1.
dd
Day number.
Displays the day as digits with leading zeros, as in 01.
ddd
Day abbreviation, such as Sun.
dddd
Day name, such as Sunday.
yy
Year number.
Displays the year as a two-digit number, such as 03.
yyyy
Year number.
Displays the year as a four-digit number, such as 2003.
h
Hour number.
Displays the hour as a number without leading zeros, such as 1.
If the format contains an AM or PM format, the hour is based on a 12-hour clock; otherwise, it is based on a 24-hour clock.
hh
Hour number.
Displays the hour as a number with leading zeros, as in 01.
If the format contains an AM or PM format, the hour is based on a 12-hour clock; otherwise, it is based on a 24-hour clock.
m
Minute number.
Displays the minute as a number without leading zeros, such as 1.
The m format must appear immediately after the h or
mm
Minute number.
Displays the minute as a number with leading zeros, such as 01.
The mm format must appear immediately after the h or hh symbol; otherwise, it is interpreted as month.
s
Second number.
Displays the second as a number without leading zeros, such as 1.
ss
Second number.
Displays the second as a number with leading zeros, such as 01.
AM/PM
am/pmA/P a/p
12-hour time.
Displays time using a 12-hour clock. Displays AM, am, A, or a for times between midnight and noon; displays PM, pm, P, or p for times from noon until midnight.
[h]
Total number of hours.
[m]
Total number of minutes.
[s]
Total number of seconds.
       Return to list

Currency symbols

You can include the following currency symbols in a number format. Keep the ALT key pressed and type the ANSI code of the currency. The ANSI code should be followed by the format code for the number.
To type ANSI code for the currency symbol, turn on NUM LOCK and use the numeric keypad. As you type the ANSI code, the Custom box appears blank. The currency symbol is displayed only when you finish typing the code.
Press the ALT key and type this code:
To Display:
0162
¢
0163
£
0165
¥
0128
€

Text color symbols

Symbol
Description
[Black]
Displays cell text in black.
[Blue]
Displays cell text in blue.
[Cyan]
Displays cell text in cyan.
[Green]
Displays cell text in green.
[Magenta]
Displays cell text in magenta.
[Red]
Displays cell text in red.
[White]
Displays cell text in white.
[Yellow]
Displays cell text in yellow.
       Return to list

Conditional symbols

Symbol
Description
[conditional value]
Designates a different condition for each section.
For example, data in a column has values ranging from 200 to 800. You want the text "Poor" to display in black for values less than 400, "Good" to display in red for values greater than 600, and "Average" for values between 400 and 600. You can use the following code:
[<400][Black]"Poor";[>600][Red]"Good";[Blue]"Average"
In this example, [<400] and [>600] are the conditional values.

Labels:

Comments

Post a Comment

Popular posts from this blog

Microstrategy "Error type: Odbc error. Odbc operation attempted

 "Error type: Odbc error. Odbc operation attempted: SQLExecDirect. [HYT00:0: on SQLHANDLE] [MicroStrategy][ODBC Oracle Wire Protocol driver]Timeout expired" is shown when executing reports from Web When users are trying to execute some reports in MicroStrategy web in particular, they may receive the Error “SQL Generation Complete Index out of range” and “Timeout expired” error as shown below: Possible Causes: One possible cause is that the MicroStrategy Intelligence Server using a cached database connection that was already dropped by the RDBMS. To resolve this: Admin should delete the database connection caches and create a new DSNs in case they are sharing DSNs to connect to different databases. In addition, change the settings for the ‘Connection lifetime’ and the ‘Connection idle time out’.  Follow the steps below to perform the mentioned changes and verify the report after each step and some of the settings require i-server r...
4 comments
Read more

Create an alert-based subscription in MicroStrategy Distribution Services

Create an alert-based subscription in MicroStrategy Distribution Services on Web Subscription to a report or Report Services document which will be executed when a certain conditional threshold is met based on another executing report. For example, a scheduled report executes which shows the Revenue by day for the past week. If the Revenue on any one day falls below a certain value, a subscription to another report or Report Services document can be triggered and delivered to a recipient. An alert based subscription can only be created directly on a report; however, another report or Report Services document can be delivered when the alert based subscription is triggered. Note: you need a grid report to create an alert and you cannot create if you want to create on a document with text boxes. The following example will walk through the basic steps on how to setup a subscription based on an alert like this: Follow the brief  steps bel...
3 comments
Read more

Developer not starting with "invalid picture" message

Developer not starting with "invalid picture" message. This error could be due to the fact that t here is insufficient disk space on the drive used for the Windows Temp directory or the Optional Work Drive. https://support.microsoft.com/en-us/help/964421/error-481-invalid-picture Users may see the "Invalid Picture" error thrown when attempting to launch MicroStrategy Developer in Windows: CAUSE: This error is caused by a lack of available space on the user's hard disk to properly launch the platform. ACTION: To remedy the issue, simply clear up some active space on the hard drive to allow MicroStrategy to properly launch.
2 comments
Read more

Types of prompts in Microstrategy

Types of prompts in Microstrategy The different types of prompts allow you to create a  prompt  for nearly every part of a report. Prompts can be used in many objects including reports, filters, metrics, and custom groups, but all prompts require user interaction when the report is executed. The correct prompt type to create depends on what report objects you want users to be able to base a filter on to filter data, as described in the list below. Filter definition prompts   allow users to determine how the report's data is filtered, based on one of the following objects: Attributes in a hierarchy : Users can select prompt answers from one or more attribute elements from one or more attributes. The attribute elements that they select are used to filter data displayed on the report. This prompt lets you give users the largest number of attribute elements to choose from when they answer the prompt to define their filtering criteria. For example, on a repor...
1 comment
Read more

Settings for Outer Join between metrics in MicroStrategy

Settings for Outer Join between metrics in MicroStrategy MicroStrategy adopts multi-pass logic to determine the execution plan for a report. This means that every metric is evaluated in separate SQL passes. Outer Joins come into play when MicroStrategy Engine merges the results from all SQL passes into one report. For a multi-pass report, different Outer Join behaviors can give the user completely different results. In addition, report metrics can be of different types which can, in some cases, influence the result of the outer join. In MicroStrategy, there are two settings that users can access to control Outer Join behavior : Formula Join Type and Metric Join Type . Metric Join Type: VLDB Setting at Database Instance Level Report and Template Levels Report Editor > Data > Report Data Options Metric Level   Metric editor > Tools > Metric Join Type Control Join between Metrics Formula Join Type: Only at Compound/Split...
1 comment
Read more

Create a Visualization Filter in a Dossier

Create a Visualization Filter You can select attribute values to filter data that appears in a visualization by creating an attribute filter. Create a visualization filter by dragging attributes and metrics from the Datasets panel. To create an attribute filter Open the dossier  you want to modify. Select the chapter that contains the visualization to filter. Click  Filter  . An empty filter appears in the dossier. Drag the attributes and metrics for filtering from the Datasets panel to the empty filter. Use the Ctrl key to select multiple attributes and metrics. In the filter, click  Select Target . Click on target visualizations or visualization filters to select them. You can select targets across chapters and pages, as long as they are all on the same page. Click  Apply . Click  More   in the filter and select options for modifying the filter. The available options are based on the objects you select.
Post a Comment
Read more

Types of filters in Microstrategy

Types of filters in Microstrategy Below are the types of filters: 1. Attribute qualification filter These types of qualifications restrict data related to attributes on the report. a) Attribute form qualification Filters data related to a business attribute’s form(s), such as ID or description. •  For example, the attribute Customer has the forms ID, First Name, Last Name, Address, and Birth Date. An attribute form qualification might filter on the form Last Name, the operator Begins With, and the letter H. The results show a list of customers whose last names start with the letter H. b) Attribute element list qualification Filters data related to a business attribute’s elements, such as New York, Washington, and San Francisco, which are elements of the attribute City. • For example, the attribute Customer has the elements John Smith, Jane Doe, William Hill, and so on. An attribute element list qualification can filter data to display only those customer...
6 comments
Read more

Allow a Visualization to Update the Data in Another Visualization in Dossier

Allow a Visualization to Update the Data in Another Visualization After adding multiple visualizations to a dossier, you can select values in one visualization (that is, the source) to automatically update data in another visualization (that is, the target). This is done by creating a filter on a visualization that targets other visualizations. To Add a Target Visualization to Your Dossier: Open the dossier with the visualization. Click  Insert Visualization   . A blank visualization appears in the dossier. From the Visualizations panel, select  Grid   . Drag an attribute from the Datasets panel to the  Rows  area of the Editor panel to add attributes to the rows. Drag an attribute from the Datasets panel to the  Columns  area of the Editor panel to add attributes to the columns. Drag a metric from the Datasets panel to the  Metrics  area of the Editor panel, to add a metric to the grid. The Metric Names attribute automatically appears i...
Post a Comment
Read more

Custom Tooltips in Microstrategy developer and Web

Custom Tooltips in Microstrategy developer and Web The following table describes the macros you can use to customize graph tooltips in both MicroStrategy Developer and MicroStrategy Web: Macro Information Displayed {&TOOLTIP} All relevant labels and values associated with a graph item. {&GROUPLABEL} Name of the graph item's category. This value is often the graph item's attribute element information, as attributes are commonly used as the categories of graph reports. {&SERIESLABEL} Name of the graph item’s series. This value is often the graph item's metric name information, as metrics are commonly used as the series of graph reports. {&VALUE} The value of a given data point. {&XVALUE} The X-value of a data point. Only applicable to Bubble charts and Scatter plots. {&YVALUE} The Y-value of a data point. Only applicable to Bubble charts and Scatter plots. {&ZVALUE} The Z-value of a data point. Only applicable to Bubble charts and Scatter plots. {...
2 comments
Read more