Skip to main content

Microstrategy Custom number formatting symbols

Custom number formatting symbols

If none of the built-in number formats meet your needs, you can create your own custom format in the Number tab of the Format Cells dialog box. Select Custom as the Category and create the format using the number format symbols listed in the table below. Each custom format can have up to four optional sections, one each for:
  • Positive numbers
  • Negative numbers
  • Zeros
  • Text
Each section is optional. Separate the sections by semicolons, as shown in the example below:
#,###;(#,###);0;"Error: Entry must be numeric"
For more examples, see Custom number formatting examples.
To jump to a section of the formatting symbol table, click one of the following:

Numeric symbols

For details on how numeric symbols apply to the Big Decimal data type, refer to the Project Design Guide.
Symbol
General
General
Displays the number in General format, that is, no specific number format.
0
Digit placeholder.
  • If the number contains fewer digits than the format contains placeholders, the number is padded with zeros. For example, the format code 00000 displays the number 12 as 00012.
  • Use this placeholder for mandatory zeros.
  • If there are more digits to the right of the decimal point than placeholders in the format, the decimal portion is rounded to the number of places specified by the placeholders.
  • If there are more digits to the left of the decimal point than the placeholders in the format, the extra digits are retained.
  • If the format contains zeros to the left of the decimal point, numbers less than one are displayed with a zero to the left of the decimal point.
#
Digit placeholder.
  • This digit placeholder displays only significant digits and does not display insignificant zeros. For example, the format code ##.## displays the number 0025.360 as 25.63.
  • Use this placeholder to indicate optional zeros.
  • If there are more digits to the right of the decimal point than placeholders in the format, the decimal portion is rounded to the number of places specified by the placeholders.
  • If there are more digits to the left of the decimal point than the placeholders in the format, the extra digits are retained.
  • If the format contains only number signs (#) to the left of the decimal point, numbers less than one are displayed beginning with a decimal point. For example, the format #.00 will display the number 0.43 as .43.
?
Digit placeholder.
  • This digit placeholder adds spaces for insignificant zeros on either side of the decimal point so that decimal points align when formatted with a fixed-width font.
  •  You can also use question marks (?) for fractions that have varying numbers of digits.
%
Displays the number as a percentage, by multiplying the number by 100 and appending the percent character (%).
,
(comma)
Thousands separator.
  • If the format contains commas separated by number signs (#) or zeros, a thousands separator is used in the formatted text.
    The actual thousands separator used depends on the session locale.
  • A comma following a placeholder scales the number by a thousand. For example, using 0, scales the number by 1000, so that 10,000 displays as 10.
.
(period)
Decimal separator.
The actual decimal separator used depends on the session locale.

E-
Scientific notation.
  • If the format contains a scientific notation symbol to the left of a 0 or # placeholder, the number is displayed in scientific notation and an E or
  • The number of 0 and # placeholders to the right of the decimal determines the number of digits in the exponent.
  • E- and e- place a minus sign by negative exponents.
  • E+ and e+ place a minus sign by negative exponents and a plus sign by positive exponents.
       Return to list

Character/text symbols

Symbol
Description
"text"
Displays the text inside the quotation marks. Even if the text is a valid formatting symbol, it is treated as literal text if it appears within quotes.
Use quotation marks around any character that is not a formatting symbol, including a space, the dollar sign ($), minus sign (-), slash (/), exclamation mark (!), ampersand (&), tilde (~), curly brackets ({ }), equals sign (=), less than and greater than signs (< >), and the caret (^). This ensures that the text appears correctly in both MicroStrategy Developer and MicroStrategy Web.
:
In a date/time format, the colon (:) does not need to be enclosed in double quotation marks (" "). However, to display it in a numeric format, it must be enclosed in quotes. For example, if you have an integer that must be displayed as 12:34:56, the correct format is "##":"##":"##".
*
The asterisk (*) repeats the next character until the width of the column is filled. Only one asterisk can be used in each format section.
_
The underline ( _ ) skips the width of the next character. For example, to make negative numbers surrounded by parentheses align with positive numbers, you can include the format _). Positive numbers will then skip the width of a parenthesis.
       Return to list

Date and time symbols

Symbol
Description
m
Month number.
Displays the month as digits without leading zeros, such as 1.
Can also represent minutes when used with the h or hh formats.
mm
Month number.
Displays the month as digits with leading zeros, as in 01.
Can also represent minutes when used with the h or hh formats.
mmm
Month abbreviation, such as Jan.
mmmm
Month name, such as January.
d
Day number.
Displays the day as digits with no leading zeros, such as 1.
dd
Day number.
Displays the day as digits with leading zeros, as in 01.
ddd
Day abbreviation, such as Sun.
dddd
Day name, such as Sunday.
yy
Year number.
Displays the year as a two-digit number, such as 03.
yyyy
Year number.
Displays the year as a four-digit number, such as 2003.
h
Hour number.
Displays the hour as a number without leading zeros, such as 1.
If the format contains an AM or PM format, the hour is based on a 12-hour clock; otherwise, it is based on a 24-hour clock.
hh
Hour number.
Displays the hour as a number with leading zeros, as in 01.
If the format contains an AM or PM format, the hour is based on a 12-hour clock; otherwise, it is based on a 24-hour clock.
m
Minute number.
Displays the minute as a number without leading zeros, such as 1.
The m format must appear immediately after the h or
mm
Minute number.
Displays the minute as a number with leading zeros, such as 01.
The mm format must appear immediately after the h or hh symbol; otherwise, it is interpreted as month.
s
Second number.
Displays the second as a number without leading zeros, such as 1.
ss
Second number.
Displays the second as a number with leading zeros, such as 01.
AM/PM
am/pmA/P a/p
12-hour time.
Displays time using a 12-hour clock. Displays AM, am, A, or a for times between midnight and noon; displays PM, pm, P, or p for times from noon until midnight.
[h]
Total number of hours.
[m]
Total number of minutes.
[s]
Total number of seconds.
       Return to list

Currency symbols

You can include the following currency symbols in a number format. Keep the ALT key pressed and type the ANSI code of the currency. The ANSI code should be followed by the format code for the number.
To type ANSI code for the currency symbol, turn on NUM LOCK and use the numeric keypad. As you type the ANSI code, the Custom box appears blank. The currency symbol is displayed only when you finish typing the code.
Press the ALT key and type this code:
To Display:
0162
¢
0163
£
0165
¥
0128
€

Text color symbols

Symbol
Description
[Black]
Displays cell text in black.
[Blue]
Displays cell text in blue.
[Cyan]
Displays cell text in cyan.
[Green]
Displays cell text in green.
[Magenta]
Displays cell text in magenta.
[Red]
Displays cell text in red.
[White]
Displays cell text in white.
[Yellow]
Displays cell text in yellow.
       Return to list

Conditional symbols

Symbol
Description
[conditional value]
Designates a different condition for each section.
For example, data in a column has values ranging from 200 to 800. You want the text "Poor" to display in black for values less than 400, "Good" to display in red for values greater than 600, and "Average" for values between 400 and 600. You can use the following code:
[<400][Black]"Poor";[>600][Red]"Good";[Blue]"Average"
In this example, [<400] and [>600] are the conditional values.

Labels:

Comments

Post a Comment

Popular posts from this blog

HyperIntelligence Training Videos

HyperIntelligence  Training Videos           Design and build hyper cards Optimizing Datasets for HyperIntelligence Using the HyperIntelligence for Office Outlook Add-In Building HyperIntelligence Cards Using HyperIntelligence for Mobile on Android Deploying HyperIntelligence for Outlook Insights On-The-Go: HyperIntelligence for Mobile Building HyperIntelligence Profile Cards Designing Custom HyperIntelligence Cards Using the Calendar with HyperIntelligence for Mobile
4 comments
Read more

Administration standards to optimize network data transfer speeds

Optimization standards to help developers work with the System Administrator to optimize network data transfer speeds: Place all server components in the same segment to minimize latency between the Intelligence Server, Web server, data warehouse server, and metadata server Expand bandwidth and minimize latency between servers and clients to ensure that bottlenecks do not occur when data is requested over your network Use HTTP compression between the Web servers and Web clients to achieve maximum throughput between these components Configure a Web proxy server to handle caching and reduce the load on the Web server
1 comment
Read more

Microstrategy Dossiers explained

Microstrategy  Dossiers With the release of MicroStrategy 10.9, we’ve taken a leap forward in our dashboarding capabilities by simplifying the user experience, adding storytelling, and collaboration.MSTR has  evolved dashboards to the point that they are more than dashboards - they are  interactive, collaborative analytic stories . Ultimately, it was time to go beyond dashboards, both in concept and in name, and so  the've  renamed VI dashboards to  ‘ dossiers ’.  Dossiers can be created by using the new Desktop product or Workstation or simply from the Web interface which replaces Visual Insights. All the existing visual Insights dashboards will be converted to Dossiers   With MicroStrategy 10.9, there was an active focus on making it easier to build dashboards for the widest audience of end users. To achieve this, some key new capabilities were added that make it easier to author, read, interact and collaborate on dashboards ...
7 comments
Read more

Customers Who Live in the Same City as Call Centers

Customers Who Live in the Same City as Call Centers Your new utility company has call centers located throughout the country, and your recent surveys indicate that customers who live in the same city as a call center are particularly satisfied with service due to extremely rapid repairs during power outages. To begin your new advertising campaign, you want to generate a list of Call Centers that coincide with Customer Cities. The following steps create an attribute-to-attribute qualification filter that generates the list of desired cities. To Create an Attribute-To-Attribute Qualification that Compares the Call Center and Customer City Attributes In MicroStrategy Web, log in to a project. Open any folder page (for example, click Shared Folders on the home page). Click the  Create Filter  icon  . From the Object browser on the left, select the  Customer City  attribute from the Customers hierarchy and drag it to the filter pane on the right. Change  Qualify...
1 comment
Read more

Apply or Pass-through functions in Microstrategy

Ap ply (Pass-Through) functions MSTR Apply functions provide access to functions or syntactic constructs that are not standard in MicroStrategy but are provided by various RDBMS systems.. Syntax common to Apply functions Apply Function Name   ("expression with placeholders", Arg1, Arg2, Arg3, …ArgN) where: Apply Function Name  – is a generic name used for the predefined pass-through functions described above expression with placeholders  – is the string describing the actual expression or syntax that the engine uses while generating the SQL and which is sent to the RDBMS. The placeholders are represented by #0, #1, and so on. "#" is a reserved character for MicroStrategy. Arg  – is an argument that replaces the parameter markers in the pattern. Arg1 replaces #0, Arg2 replaces #1, and so on. There are   five  pre-defined Apply functions to replace regular, predefined functions of the same type. For more details, cli...
6 comments
Read more

MicroStrategy URL API Parameters

MicroStrategy URL Structure The following table summarizes the root URL structure used for every request to MicroStrategy Web. Environment Main Application URL Administration URL J2EE http://webserver/MicroStrategy/servlet/mstrWeb http://webserver/MicroStrategy/servlet/mstrWebAdmin .NET http://webserver/MicroStrategy/asp/Main.aspx http://webserver/MicroStrategy/asp/Admin.aspx Every request sent to MicroStrategy Web calls a central controller. Parameters are appended to  Main.aspx  or  mstrWeb  (in a .NET and J2EE environment, respectively) to indicate to the controller how the request should be internally forwarded and handled. The following examples show a URL for accessing a MicroStrategy folder when the user does not have an existing session. The URL contains not only the parameters needed to connect to MicroStrategy Web, but also the parameters needed to log on and create a session. J2EE environment: <a href="http:...
2 comments
Read more

mstrio – Python and R wrappers for the MicroStrategy

mstrio – Python and R wrappers for the MicroStrategy REST APIs Connecting to MicroStrategy  Create a connection to the Intelligence Server using   Connection()   and    connect()  in Python and R, respectively. Required arguments for the   Connection()  function are the URL for the MicroStrategy REST API server, MicroStrategy Intelligence Server username and password, as well as the MicroStrategy project name. By default, the   connect()  function anticipates your MicroStrategy Intelligence Server username and password. LDAP authentication is also supported. Use the optional argument    login_mode=16    in the    connect()  function for LDAP authentication.  Extract data from cubes and reports  To extract data from MicroStrategy cubes and reports, use the   get_cube()  and   get_report()  functions. Use...
8 comments
Read more

Create an alert-based subscription in MicroStrategy Distribution Services

Create an alert-based subscription in MicroStrategy Distribution Services on Web Subscription to a report or Report Services document which will be executed when a certain conditional threshold is met based on another executing report. For example, a scheduled report executes which shows the Revenue by day for the past week. If the Revenue on any one day falls below a certain value, a subscription to another report or Report Services document can be triggered and delivered to a recipient. An alert based subscription can only be created directly on a report; however, another report or Report Services document can be delivered when the alert based subscription is triggered. Note: you need a grid report to create an alert and you cannot create if you want to create on a document with text boxes. The following example will walk through the basic steps on how to setup a subscription based on an alert like this: Follow the brief  steps bel...
3 comments
Read more