Disable data blending in MicroStrategy

Starting in MicroStrategy 9.4 data blending was made available for documents and dashboards. This permits grid, graph and widget objects to source data from multiple different datasets at the same time.

This is available under the analytical engine VLDB properties inside of project configuration. The property is named "document grids from multiple datasets" and defaults to enabled but can be set to disabled.

Below are the steps to enable/disable the settings of data blending:

1. Go to project configuration by right clicking on specific project(You need admin rights to do this).

2. In the Project configuration windows as shown below select Configure under Project level VLDB settings section.

3. Now it will open the VLDB settings window, select + on "Analytical Engine Settings" and then click on " Document Grids from multiple datasets" option.

You will be presented with two options, the first option enables the data blending "Allow objects from document grids to come from multiple datasets"

and the second option which will disable the data blending is called "Objects in documents grids must come from the grids source dataset only"

This property is a good choice to test disabling in environments where reports seem to execute quickly but documents and dossiers have performance issues.

More information on how to effectively use data blending in MSTR web link below:https://community.microstrategy.com/s/article/KB324175-How-data-blending-handles-related-attributes-when

Comments

Case functions Microstrategy

Ca se functions Microstrategy Case functions return specified data in a SQL query based on the evaluation of user-defined conditions. In general, a user specifies a list of conditions and corresponding return values. Case This function evaluates multiple expressions until a condition is determined to be true, then returns a corresponding value. If all conditions are false, a default value is returned. Case can be used for categorizing data based on multiple conditions. This is a single-value function. Syntax Case ( Condition1 , ReturnValue1 , Condition2 , ReturnValue2 ,..., DefaultValue ) Example Case(([Total Revenue] < 300000), 0, ([Total Revenue] < 600000), 1, 2) sum(Case (Day@DESC in (“Sat”,”Sun”), Sales, 0) {~+} Sum(Case(Category@DESC In("Books","Electronics"),Revenue,0)){~+} CaseV (case vector) CaseV evaluates a single metric and returns different values according to the results. It can be used to perfo...

mstrio – Python and R wrappers for the MicroStrategy

mstrio – Python and R wrappers for the MicroStrategy REST APIs Connecting to MicroStrategy Create a connection to the Intelligence Server using Connection() and  connect() in Python and R, respectively. Required arguments for the   Connection()  function are the URL for the MicroStrategy REST API server, MicroStrategy Intelligence Server username and password, as well as the MicroStrategy project name. By default, the  connect()  function anticipates your MicroStrategy Intelligence Server username and password. LDAP authentication is also supported. Use the optional argument  login_mode=16  in the  connect()  function for LDAP authentication. Extract data from cubes and reports To extract data from MicroStrategy cubes and reports, use the get_cube()  and  get_report() functions. Use...

Microstrategy Dossiers explained

Microstrategy Dossiers With the release of MicroStrategy 10.9, we’ve taken a leap forward in our dashboarding capabilities by simplifying the user experience, adding storytelling, and collaboration.MSTR has evolved dashboards to the point that they are more than dashboards - they are interactive, collaborative analytic stories . Ultimately, it was time to go beyond dashboards, both in concept and in name, and so the've renamed VI dashboards to ‘ dossiers ’. Dossiers can be created by using the new Desktop product or Workstation or simply from the Web interface which replaces Visual Insights. All the existing visual Insights dashboards will be converted to Dossiers With MicroStrategy 10.9, there was an active focus on making it easier to build dashboards for the widest audience of end users. To achieve this, some key new capabilities were added that make it easier to author, read, interact and collaborate on dashboards ...

Derived metric based on attribute values

Derived metric based on attribute values Here is how could create and display data correctly on using below simple steps. Create a report with Category, Subcategory and Revenue. Create New Metric in a report or VI. Case((Category@ID = 1), Revenue, 0) Booksand Name it as Revenue for where 2 is Category ID for "Books" Report will display result as below. Result for new metric is blank. Now to fix this create a new Derived metric on Category attribute first with formula as Max(Category) {~ } and calling Books Now Edit the "Revenue for Books metric and Replace Category@ID with this new Books metric formula would looks like this Case((Books = 1), Revenue, 0). Report result would now display as expected as shown below

MicroStrategy URL API Parameters

MicroStrategy URL Structure The following table summarizes the root URL structure used for every request to MicroStrategy Web. Environment Main Application URL Administration URL J2EE http://webserver/MicroStrategy/servlet/mstrWeb http://webserver/MicroStrategy/servlet/mstrWebAdmin .NET http://webserver/MicroStrategy/asp/Main.aspx http://webserver/MicroStrategy/asp/Admin.aspx Every request sent to MicroStrategy Web calls a central controller. Parameters are appended to Main.aspx or mstrWeb (in a .NET and J2EE environment, respectively) to indicate to the controller how the request should be internally forwarded and handled. The following examples show a URL for accessing a MicroStrategy folder when the user does not have an existing session. The URL contains not only the parameters needed to connect to MicroStrategy Web, but also the parameters needed to log on and create a session. J2EE environment: <a href="http:...

Microstrategy Custom number formatting symbols

Custom number formatting symbols If none of the built-in number formats meet your needs, you can create your own custom format in the Number tab of the Format Cells dialog box. Select Custom as the Category and create the format using the number format symbols listed in the table below. Each custom format can have up to four optional sections, one each for: Positive numbers Negative numbers Zeros Text Each section is optional. Separate the sections by semicolons, as shown in the example below: #,###;(#,###);0;"Error: Entry must be numeric" For more examples, see Custom number formatting examples . To jump to a section of the formatting symbol table, click one of the following: Numeric symbols Character/text symbols Date and time symbols Text color symbols Currency symbols Conditional symbols Numeric symbols For details on how numeric symbols apply to the Big Decimal data type, refer to the Project Design Guide . ...

Microstrategy Dashboard performance improvements steps

Microstrategy Dashboard performance improvements steps: Many times, causes of poor performance can be simplified to specific components. To troubleshoot performance issues, users must identify these components, then make the appropriate modifications to the environment and/or to the MicroStrategy dashboard to reduce bottlenecks. Dashboard execution stages can be represented below: MicroStrategy Intelligence Server When an end user makes a Document Execution Request through any client (a web browser via MicroStrategy Web, the MicroStrategy Desktop/Developer client, the MicroStrategy Mobile app, or the MicroStrategy Office client), the request is sent to the MicroStrategy Intelligence Server, which processes the request and prepares the response. The MicroStrategy Intelligence Server will execute all children datasets on the dashboard by either generating SQL and running this against the data warehouse, or by fetching data from a cache. The Inte...

Fact tables levels tables in Microstrategy explained

Fact tables levels in Microstrategy: Fact tables are used to store fact data. Fact tables should contain attribute Id's and fact values which are measurable. All the descriptive information about the fact tables should stored in Dimension tables either in Star Schema fashion or Snow Flake Schema fashion which is best suited to your reporting solution. Since attributes provide context for fact values, both fact columns and attribute ID columns are included in fact tables. Facts help to link indirectly related attributes using these attribute ID columns. The attribute ID columns included in a fact table represent the level at which the facts in that table are stored. So the level of a fact table in the Fact_Item_Day_Customer can be the attribute Id's which is at Day, Item & Customer Id level. For example, fact tables containing sales and inventory data look like the tables shown in the following diagram: Base fact columns ver...

Prompt-in-prompt(Nested Prompts) in Microstrategy

Prompt-in-prompt(Nested Prompts) in Microstrategy Nested prompts allows you to create one prompt based on the other and other bases on another, nested prompts allows us to prompt the highest level(Like year) to middle level(like Quarter, then to the low level(like Month). Here you can see how to create a 3-level deep nested prompt that will prompt the user to select a year, then a quarter within that year, then a month within that quarter. Prompt-in-prompt is a feature in which the answer to one prompt is used to define another prompt. This feature is only implemented for element list prompts . The following procedure describes how to achieve this: Create the highest level filter. This is a filter which contains a prompt on an attribute element list. Create a filter on the attribute "Year." Click "prompt on attribute element list" and click "Next" through the rest of the screens to accept the default values. Do not set any additio...

Image URL Attribute type HTML Tag in Microstartegy

Creating and attribute with a form with Image URL Image URL Attribute: <img src='images\Folder\UBD\nstudios\N/A.png' height='120' width='163'> <img src='images\Folder\UBD\nstudios\BCU.png' height='120' width='163'> <img src='images\Folder\UBD\nstudios\IUM.png' height='120' width='163'> <img src='images\Folder\UBD\nstudios\WAR.png' height='120' width='163'> <img src='images\Folder\UBD\nstudios\TVN.png' height='120' width='163'> <img src='images\Folder\UBD\nstudios\N/A.png' height='120' width='163'> <IMG src="../images/ 1.png" height=80 width=400> Concat("../images/Dash/", Id, ".png") ApplySimple(" '<img src=../images/Dash/'+ltrim(str(#0))+'.png height=120 width=120>' ", Id) IF((StudioName = "OURS"), "Ours...

Microstrategy Analytics

Search This Blog