Skip to main content

Activate MicroStrategy Geospatial Services



Activate MicroStrategy Geospatial Services


MicroStrategy 10.11 introduces our new mapping capability: MicroStrategy Geospatial Services, powered by Mapbox. This enhanced map visualization is available for dossiers on all interfaces including MicroStrategy Desktop, Workstation, Web and Library (Mobile included). With MicroStrategy Geospatial Services, MicroStrategy now offers advanced geospatial analytics features that allow users to get more out of their location data. This new feature is available in addition to the out-of-the-box ESRI maps.

MicroStrategy Geospatial Services allows users to:
  • Plot polygon shapes for most countries, down to the zip code level
  • Perform powerful interaction between layers (progressively hide or show data layers as zoom levels change)
  • Identify and resolve location name conflicts
  • Add thresholds to data points, size markers for metrics, and color by for both attributes and metrics
  • Fine tune clustering behavior when aggregating data on a map
  • Use mapping across all devices
  • Rotate or tilt the map, and zoom in or out more fluidly than ever before. 
  • Reset map to original zoom level with just one click
  • Use 10 different basemap styles to best visualize information
MicroStrategy Geospatial Services will be available as an add-on service, however you can use the trial version to test this service out. Follow the steps below to get started.

Note: The steps below are not necessary for MicroStrategy Workstation and MicroStrategy Desktop. MicroStrategy Geospatial Services is automatically enabled in these.

PREREQUISITES

Before configuring cloud-based MicroStrategy Geospatial maps, obtain a key by following the steps below:
  • Navigate to the MicroStrategy Download site
  • Locate the Request Geospatial key button above the products session and click on Mapbox Key :
User-added image 
  • Each key is DSI specific. On the next screen, select the DSI you want, then click the Generate Geospatial Service key button. The key will show up on the screen and will also be emailed to you. If there is a problem retrieving your key online, a Technical Support case will be opened automatically on your behalf and a Technical Support engineer will follow up with you.
User-added image
 
CONFIGURATION STEPS
  • Browse to the mapConfig.xml file for MicroStrategy web, located by default in the \MicroStrategy\WEB ASPx\WEB-INF\xml\config folder
  • Edit the mapConfig.xml file in any text editor and enter the key obtained from the section above into the configuration file between the <tk> nodes under Mapbox configuration section, like shown below:
User-added image
  • Browse to the mapConfig.xml file, or MicroStrategy Library, located by default in the \MicroStrategyLibrary\WEB-INF\xml\config folder
  • Edit the mapConfig.xml file in any text editor and enter the key obtained from the section above into the configuration file between the <tk> nodes, like step 2.
  • Restart the web server for the changes to take effect.
Labels:

Comments

Post a Comment

Popular posts from this blog

MicroStrategy URL API Parameters

MicroStrategy URL Structure The following table summarizes the root URL structure used for every request to MicroStrategy Web. Environment Main Application URL Administration URL J2EE http://webserver/MicroStrategy/servlet/mstrWeb http://webserver/MicroStrategy/servlet/mstrWebAdmin .NET http://webserver/MicroStrategy/asp/Main.aspx http://webserver/MicroStrategy/asp/Admin.aspx Every request sent to MicroStrategy Web calls a central controller. Parameters are appended to  Main.aspx  or  mstrWeb  (in a .NET and J2EE environment, respectively) to indicate to the controller how the request should be internally forwarded and handled. The following examples show a URL for accessing a MicroStrategy folder when the user does not have an existing session. The URL contains not only the parameters needed to connect to MicroStrategy Web, but also the parameters needed to log on and create a session. J2EE environment: <a href="http:...
2 comments
Read more

Microstrategy Custom number formatting symbols

Custom number formatting symbols If none of the built-in number formats meet your needs, you can create your own custom format in the Number tab of the Format Cells dialog box. Select  Custom  as the Category and create the format using the number format symbols listed in the table below. Each custom format can have up to four optional sections, one each for: Positive numbers Negative numbers Zeros Text Each section is optional. Separate the sections by semicolons, as shown in the example below: #,###;(#,###);0;"Error: Entry must be numeric" For more examples, see  Custom number formatting examples . To jump to a section of the formatting symbol table, click one of the following: Numeric symbols Character/text symbols Date and time symbols Text color symbols Currency symbols Conditional symbols Numeric symbols For details on how numeric symbols apply to the Big Decimal data type, refer to the  Project Design Guide . ...
4 comments
Read more

Case functions Microstrategy

Ca se functions Microstrategy Case functions return specified data in a SQL query based on the evaluation of user-defined conditions. In general, a user specifies a list of conditions and corresponding return values. Case This function evaluates multiple expressions until a condition is determined to be true, then returns a corresponding value. If all conditions are false, a default value is returned.  Case  can be used for categorizing data based on multiple conditions. This is a single-value function. Syntax Case ( Condition1 ,  ReturnValue1 ,  Condition2 , ReturnValue2 ,...,  DefaultValue ) Example Case(([Total Revenue] < 300000), 0, ([Total Revenue] < 600000), 1, 2) sum(Case (Day@DESC in (“Sat”,”Sun”), Sales, 0) {~+} Sum(Case(Category@DESC In("Books","Electronics"),Revenue,0)){~+} CaseV (case vector) CaseV  evaluates a single metric and returns different values according to the results. It can be used to perfo...
3 comments
Read more

Microstrategy Document Autotext macros:

Autotext  code/macros in  Microstrategy Document/dashboard This is a list of the available auto text macros that the Report Services Document engine recognizes. The following auto text codes allow you to add  document variable information to your document. These auto text codes are automatically replaced by information about the document. Auto text codes for MSTR document/dashboard:  AUTOTEXT DESCRIPTION   {&PAGE}  Display the current page.  {&NPAGES}  Display the total number of pages.  {&DATETIME}  Display the current date and time.  {&USER}  Display the user name that is executing the Report Services Document.  {&DOCUMENT}  Display the document name.  {&DOCUMENTID}  Display the document ID.  {&DESCRIPTION}  Display the document description.  {&PROJECT}  Display the project name.  {&EXECUTIONTIME}  Dis...
2 comments
Read more

Configure a report for use with Bulk Export in MicroStrategy

Configure a report for use with Bulk Export in MicroStrategy The Bulk Export feature enables a large report to be saved as a delimited text file. Using this feature, it is possible to retrieve result sets from a large dataset without having to load the entire dataset into memory. PS:  Once a report is setup for bulk export it cannot be used as a regular report. So if the report needs to be run as a normal report and as a bulk export report, the first step is to make a copy of the report for use with bulk export. Configure Bulk Export Bulk Export options are only available in MicroStrategy Developer. Open a 3-tier connection using MicroStrategy Developer and edit the desired report. Go to 'Data' on the top menu bar. Select 'Configure Bulk Export': Specify any additional desired configuration options. General Settings Bulk export database instance : This is the database instance to use to store the bulk export results. Temporary tables w...
Post a Comment
Read more

Microstrategy Caches explained

Microstrategy Caches Improving Response Time: Caching A  cache is a result set that is stored on a system to improve response time in future requests.  With caching, users can retrieve results from Intelligence Server rather than re-executing queries against a database. To delete all object caches for a project 1 In Developer, log into a project. You must log in with a user account that has administrative privileges. 2 From the  Administration  menu, point to  Projects , and then select  Project Configuration . The Project Configuration Editor opens. 3 Expand  Caching , expand  Auxiliary Caches , then select  Objects . To delete all configuration object caches for a server 1 Log in to the project source. 2 From the  Administration  menu in Developer, point to  Server , and then select  Purge Server Object Caches . 4 Click  Purge Now . To purge web cache follow the steps in the link ...
3 comments
Read more

Microstrategy "Error type: Odbc error. Odbc operation attempted

 "Error type: Odbc error. Odbc operation attempted: SQLExecDirect. [HYT00:0: on SQLHANDLE] [MicroStrategy][ODBC Oracle Wire Protocol driver]Timeout expired" is shown when executing reports from Web When users are trying to execute some reports in MicroStrategy web in particular, they may receive the Error “SQL Generation Complete Index out of range” and “Timeout expired” error as shown below: Possible Causes: One possible cause is that the MicroStrategy Intelligence Server using a cached database connection that was already dropped by the RDBMS. To resolve this: Admin should delete the database connection caches and create a new DSNs in case they are sharing DSNs to connect to different databases. In addition, change the settings for the ‘Connection lifetime’ and the ‘Connection idle time out’.  Follow the steps below to perform the mentioned changes and verify the report after each step and some of the settings require i-server r...
4 comments
Read more

Control the display of null and zero metric values

Show   Control the display of null and zero metric values in a grid report You can determine how to display or hide rows and columns in a grid report that consist only of null or zero metric values. You can have MicroStrategy hide the rows and columns in the following ways: Hide rows and columns that consist only of null metric values Hide rows and columns that consist only of zero metric values Hide rows and columns that consist only of null or zero metric values (default) Once you have defined how MicroStrategy hides null and zero metric values in the grid, you can quickly show or hide the grid using the Hide Nulls/Zeros option in the Data menu, as described below, or by clicking the  Hide Nulls/Zeros  icon  in the Data toolbar. To determine how null and zero metric values are displayed or hidden in a grid report Open the report in Edit mode. From the  Tools  menu, select  Report Options . The Report Options...
Post a Comment
Read more

Custom Subtotal Displays in MicroStrategy

Defining custom subtotal displays in MicroStrategy By default, when users apply subtotals in a report, the name of the subtotal is displayed in the subtotal line items that appear in the report. Users can use custom subtotals to give more control over the characteristics of a subtotal. Custom subtotals allow users to define custom subtotal line items that appear on the reports  U sers can make the subtotal name dynamic by typing special characters in the subtotal name field as listed in the following table. Character Description #A The name of the attribute under which the subtotal appears. #P The name of the attribute to the left of, or above the attribute under which the subtotal appears. #0 All the forms of the parent element. #1 The first form of the parent element reading from left to right or from top to bottom. #2 The second form of the parent element reading from left to right or from top to bottom. #3 The third form of th...
Post a Comment
Read more

Best Practices for using images in Microstrategy reports

Using images in Microstrategy reports On the I-Server we copy the images to the following folders: - Program Files (x86)\MicroStrategy\Developer\Images - Program Files (x86)\MicroStrategy\IntelligenceServer\Images - Program Files (x86)\Common Files\MicroStrategy\images To reference an image using relative path, the following locations are required to store the image in order to display in multiple MicroStrategy products.    Relative path sample: images/ logo.jpg To display images on: MicroStrategy Desktop, Web, Mobile, Distribution Services: * Additional Adobe Flash security rule applies when displaying images on Flash Dashboard For image to display on MicroStrategy Web Services:   Note: It is recommended that HTTP path should be used for reference image. User should consider using HTTP path to reference image and store image in an client accessible server for easier maintain and upgrading purpose ...
Post a Comment
Read more