Microstrategy Attribute error "Object BaseAttributeForm has already been deleted or is in an invalid state"

The error "Object BaseAttributeForm has already been deleted or is in an invalid state"

Issue:

The error "Object BaseAttributeForm has already been deleted or is in an invalid state" is seen when modifying attribute form's source tables in MicroStrategy 10.0-10.3. This is seen when removing the first table sorted alphabetically in the list. Removing other source tables does not cause an error.

Object BaseAttributeForm has already been deleted or is in an invalid state.

CAUSE:
This is a known issue with MicroStrategy 10.0-10.3.

ACTION:
This issue has been addressed in MicroStrategy 10.4. Upgrade to that version to take advantage of this fix.

WORKAROUND:

There are a couple of options to workaround this limitation.

Option A
1. Create a new attribute form without the undesired source table.
2. Change the form category to that of the original forms.
3. Delete the original form

Option B
1. Rename the logical table so it will be sorted after others in the source table list.
2. Remove the undesired source table
3. Rename the logical table back to the original name.

Comments

Microstrategy "Error type: Odbc error. Odbc operation attempted

"Error type: Odbc error. Odbc operation attempted: SQLExecDirect. [HYT00:0: on SQLHANDLE] [MicroStrategy][ODBC Oracle Wire Protocol driver]Timeout expired" is shown when executing reports from Web When users are trying to execute some reports in MicroStrategy web in particular, they may receive the Error “SQL Generation Complete Index out of range” and “Timeout expired” error as shown below: Possible Causes: One possible cause is that the MicroStrategy Intelligence Server using a cached database connection that was already dropped by the RDBMS. To resolve this: Admin should delete the database connection caches and create a new DSNs in case they are sharing DSNs to connect to different databases. In addition, change the settings for the ‘Connection lifetime’ and the ‘Connection idle time out’. Follow the steps below to perform the mentioned changes and verify the report after each step and some of the settings require i-server r...

Microstrategy Dossiers explained

Microstrategy Dossiers With the release of MicroStrategy 10.9, we’ve taken a leap forward in our dashboarding capabilities by simplifying the user experience, adding storytelling, and collaboration.MSTR has evolved dashboards to the point that they are more than dashboards - they are interactive, collaborative analytic stories . Ultimately, it was time to go beyond dashboards, both in concept and in name, and so the've renamed VI dashboards to ‘ dossiers ’. Dossiers can be created by using the new Desktop product or Workstation or simply from the Web interface which replaces Visual Insights. All the existing visual Insights dashboards will be converted to Dossiers With MicroStrategy 10.9, there was an active focus on making it easier to build dashboards for the widest audience of end users. To achieve this, some key new capabilities were added that make it easier to author, read, interact and collaborate on dashboards ...

MicroStrategy URL API Parameters

MicroStrategy URL Structure The following table summarizes the root URL structure used for every request to MicroStrategy Web. Environment Main Application URL Administration URL J2EE http://webserver/MicroStrategy/servlet/mstrWeb http://webserver/MicroStrategy/servlet/mstrWebAdmin .NET http://webserver/MicroStrategy/asp/Main.aspx http://webserver/MicroStrategy/asp/Admin.aspx Every request sent to MicroStrategy Web calls a central controller. Parameters are appended to Main.aspx or mstrWeb (in a .NET and J2EE environment, respectively) to indicate to the controller how the request should be internally forwarded and handled. The following examples show a URL for accessing a MicroStrategy folder when the user does not have an existing session. The URL contains not only the parameters needed to connect to MicroStrategy Web, but also the parameters needed to log on and create a session. J2EE environment: <a href="http:...

Personalizing file locations, email and file subscriptions using macros in Microstrategy

Personalizing file locations MSTr allows to dynamically specify the File Location and Backup File Location in a file device using macros. For example, if you specify the File Location as C:\Reports\{&RecipientName}\ , all subscriptions using that file device are delivered to subfolders of C:\Reports\ . Subscribed reports or documents for each recipient are delivered to a subfolder with that recipient’s name, such as C:\Reports\Jane Smith\ or C:\Reports\Hiro Protagonist\ . The table below lists the macros that can be used in the File Location and Backup File Location fields in a file device: Description Macro Date on which the subscription is sent {&Date} Time at which the subscription is sent {&Time} Name of the recipient {&RecipientName} User ID (32-character GUID) of the recipient {&RecipientID} Distribution Services add...

Fiscal Week, Fiscal Month, Fiscal Quarter and Fiscal Year calculations in Microstrategy

Fiscal Week, Fiscal Month, Fiscal Quarter and Fiscal Year calculations in Microstrategy FiscalWeek Returns the numeric position of a week within a fiscal year, for a given input date. This function is useful in financial reporting when the start of the fiscal year is different than the start of the calendar year. Syntax FiscalWeek< firstWeekDay , firstMonth >( Date / Time ) Where: • Date / Time is the input date or timestamp. • firstWeekDay (default value is 1) is a parameter that determines which day of the week is considered as the first day of the week. You can type an integer value from 1 to 7, with 1 representing Sunday, 2 representing Monday, and so on until 7 representing Saturday. • firstMonth (default value is 1) is a parameter that determines which month is considered as the start of the fiscal year. You can type an integer value from 1 to 12, with 1 representing January, 2 representing February, and so on until ...

Case functions Microstrategy

Ca se functions Microstrategy Case functions return specified data in a SQL query based on the evaluation of user-defined conditions. In general, a user specifies a list of conditions and corresponding return values. Case This function evaluates multiple expressions until a condition is determined to be true, then returns a corresponding value. If all conditions are false, a default value is returned. Case can be used for categorizing data based on multiple conditions. This is a single-value function. Syntax Case ( Condition1 , ReturnValue1 , Condition2 , ReturnValue2 ,..., DefaultValue ) Example Case(([Total Revenue] < 300000), 0, ([Total Revenue] < 600000), 1, 2) sum(Case (Day@DESC in (“Sat”,”Sun”), Sales, 0) {~+} Sum(Case(Category@DESC In("Books","Electronics"),Revenue,0)){~+} CaseV (case vector) CaseV evaluates a single metric and returns different values according to the results. It can be used to perfo...

Client Rendering Optimizations for Dashboard Performance Optimizations

The amount of data retrieved and objects being used in a Report Services Dashboard have a direct impact in the size of the final Dashboard. The bigger the Dashboard size the longer it will take to be prepared, be sent to the client, and render. Client Rendering Once the data reaches the end user's browser window the data has to be formatted according to the definition of the Dashboard as specified in the formatting set by the architect. To do so the browser will have to either build the HTML page in DHTML mode or initialize the flash container and parse the XML. Client rendering greatly varies depending on the hardware used. More powerful machines will render dashboard faster for a list of recommended client hardware specifications please refer to the Readme File for the specific version of MicroStrategy. Optimization Techniques common to DHTML and Flash Client rendering time greatly relies in the amount of XML that needs to be parsed. In order to ensure that...

Certify dossiers in MicroStrategy

Certify Dossiers in MicroStrategy Web Dossiers can be certified for an environment by users with certain permissions. Certified items have typically been reviewed by trusted members of your organization and are considered official sources of content, based on reliable data. Two of the Security Role which have the ability to certify dossiers: Application Administrator - Users granted this role have access to all application specific tasks. Certifier - Users granted this role can certify objects in addition to the authoring capabilities. Follow the steps below with a user who has Certifier privileges which has been added newly Users without certifier/application administrator privileges will not see the option to certify. In MicroStrategy Web, right-click on a dossier and select Properties. Check the Certified option and click Ok. Navigate to MicroStrategy Library and users will see the orange certified flag...

Custom formatting Microstrategy metric format into 1M 2M etc

Custom formatting metric values of 1,100,000 into a 1.1 million 1.1M type format In addition to the the pre-defined options for metric formatting, MicroStrategy supports custom formatting. The MicroStrategy Tutorial project is used to explain how users can customize numbers from "1,000,000" to a "1.00" format. Consider a report containing row data values greater than a million, as illustrated below: To format these metric values to use a decimal (i.e., 1.1) instead of showing all the numerals, right-click on the metric (' Revenue ' , for this example) and select Formatting > Revenue Values , as shown below: Select " Custom " as a category in the Number tab and enter ' 0,,.## ' (without quotation marks), as shown below: Confirm that the format applied properly:

Execute Integrity manager test from Command line

Execute Integrity manager test from Command line MSTR Integrity Manager allows the user to execute a test without having to load the GUI, or to schedule a test to run later at specific times or dates. Go over using Windows AT command at: https://support.microsoft.com/en-us/help/313565/how-to-use-the-at-command-to-schedule-tasks https://www.lifewire.com/at-command-2618090 Here are the prerequisites to execute a test from the command line: Create a test and saved using the Integrity Manager graphical interface. Make sure that the users has the ' Use Integrity Manager ' privilege for that project(provided by the administrator) and the ' Execute ' permission for the reports to be tested. Keep in mind that MicroStrategy Integrity Manager can only test three-tier projects, i.e., projects which are connected to a MicroStrategy i- Server. Projects in Direct Connection (two-tier) mode cannot be tested with this tool...

Microstrategy Analytics

Search This Blog