display a group horizontally in MSTR document

Display a group horizontally in MSTR document

By default, groups are displayed vertically in a document. This means that the detail sections are displayed below the Group Header. For example, a document is grouped by Year. The Detail section includes revenue and profit information by region. Displaying the group vertically yields the following document:

For certain documents, displaying and printing the group horizontally is desired. When displayed horizontally, the detail sections are displayed next to the Group Header, running horizontally across the page.

The example given above, if displayed horizontally, shows a row containing the year, and then, for each region, the Region, Revenue, and Profit. When the document is viewed as a PDF, it displays as shown below:

When being designed, the document with horizontal display looks like the following in MicroStrategy Developer:

The sections within the group are turned sideways and listed horizontally, across the page. These horizontally rendered sections are the Group Header and Footer (in this case, Year), the Detail Header, the Detail, and the Detail Footer. They are displayed in the same order as when shown vertically. The Page and Document sections are still listed vertically.

You can also change the orientation of only the lower level detail sections. In the following sample, the Detail Header, Detail, and Detail Footer are displayed horizontally while the Group Header and Group Footer are displayed vertically:

You can also display the Detail Header and Detail Footer vertically while keeping the Detail section horizontal. A document does not have to be grouped to allow these sections to be displayed horizontally. For information on displaying sections horizontally without groups

Prerequisite

•

This procedure assumes that the document is already grouped.

To display a group horizontally

In MicroStrategy Web, open the document in Design or Editable Mode.

From the Tools menu, select Grouping. The Grouping panel is displayed.

In the Grouping panel, right-click the grouping field to display horizontally, and select Grouping Properties. The Grouping Properties dialog box opens.

Select the Render object name horizontally check box.

Click OK to apply the changes and return to the document.

Comments

Microstrategy Custom number formatting symbols

Custom number formatting symbols If none of the built-in number formats meet your needs, you can create your own custom format in the Number tab of the Format Cells dialog box. Select Custom as the Category and create the format using the number format symbols listed in the table below. Each custom format can have up to four optional sections, one each for: Positive numbers Negative numbers Zeros Text Each section is optional. Separate the sections by semicolons, as shown in the example below: #,###;(#,###);0;"Error: Entry must be numeric" For more examples, see Custom number formatting examples . To jump to a section of the formatting symbol table, click one of the following: Numeric symbols Character/text symbols Date and time symbols Text color symbols Currency symbols Conditional symbols Numeric symbols For details on how numeric symbols apply to the Big Decimal data type, refer to the Project Design Guide . ...

Uniquely identifying data using Compound Key in Microstrategy

Uniquely identifying data in tables with Compound Key attribute: The types of keys that can be assigned to a table include: • Simple key requires only one column to identify a record uniquely within a table. • Compound key requires multiple columns to identify a unique record. . The following diagram shows how the different key structures can be used to identify a cal...

"Table structure cannot read or update" in the warehouse catalog error while updating a table structure in Microstrategy

"Table structure cannot read or update" in the warehouse catalog error while updating a table structure while using Warehouse Catalog in MicroStrategy Developer This issue could be due to the incorrect prefix. To fix the issue. 1. Open the Warehouse Catalog. 2. Select the table and assign the correct Prefix update the structure. 3. Save and close the warehouse catalog.

Personalizing file locations, email and file subscriptions using macros in Microstrategy

Personalizing file locations MSTr allows to dynamically specify the File Location and Backup File Location in a file device using macros. For example, if you specify the File Location as C:\Reports\{&RecipientName}\ , all subscriptions using that file device are delivered to subfolders of C:\Reports\ . Subscribed reports or documents for each recipient are delivered to a subfolder with that recipient’s name, such as C:\Reports\Jane Smith\ or C:\Reports\Hiro Protagonist\ . The table below lists the macros that can be used in the File Location and Backup File Location fields in a file device: Description Macro Date on which the subscription is sent {&Date} Time at which the subscription is sent {&Time} Name of the recipient {&RecipientName} User ID (32-character GUID) of the recipient {&RecipientID} Distribution Services add...

Prompt-in-prompt(Nested Prompts) in Microstrategy

Prompt-in-prompt(Nested Prompts) in Microstrategy Nested prompts allows you to create one prompt based on the other and other bases on another, nested prompts allows us to prompt the highest level(Like year) to middle level(like Quarter, then to the low level(like Month). Here you can see how to create a 3-level deep nested prompt that will prompt the user to select a year, then a quarter within that year, then a month within that quarter. Prompt-in-prompt is a feature in which the answer to one prompt is used to define another prompt. This feature is only implemented for element list prompts . The following procedure describes how to achieve this: Create the highest level filter. This is a filter which contains a prompt on an attribute element list. Create a filter on the attribute "Year." Click "prompt on attribute element list" and click "Next" through the rest of the screens to accept the default values. Do not set any additio...

Internationalization Design Technics

Microstrategy Internationalization Design Technics MicroStrategy supports data internationalization through two different techniques. You can either provide translated data through the use of extra tables and columns, or you can provide separate databases to store your translated data. These techniques are described below: You can support data internationalization in your database by using separate tables and columns to store your translated data. You can use various combinations of tables and columns to support and identify the translated data in your database. To support displaying the name of each month in multiple languages, you can include the translated names in a separate column, one for each required language, within the same table. Each column can use a suffix to identify that the column contains translated data for a certain language. The same LU_MONTH_OF_YEAR table with translated data for the Spanish and German langua...

MicroStrategy URL API Parameters

MicroStrategy URL Structure The following table summarizes the root URL structure used for every request to MicroStrategy Web. Environment Main Application URL Administration URL J2EE http://webserver/MicroStrategy/servlet/mstrWeb http://webserver/MicroStrategy/servlet/mstrWebAdmin .NET http://webserver/MicroStrategy/asp/Main.aspx http://webserver/MicroStrategy/asp/Admin.aspx Every request sent to MicroStrategy Web calls a central controller. Parameters are appended to Main.aspx or mstrWeb (in a .NET and J2EE environment, respectively) to indicate to the controller how the request should be internally forwarded and handled. The following examples show a URL for accessing a MicroStrategy folder when the user does not have an existing session. The URL contains not only the parameters needed to connect to MicroStrategy Web, but also the parameters needed to log on and create a session. J2EE environment: <a href="http:...

Activate MicroStrategy Geospatial Services

Activate MicroStrategy Geospatial Services MicroStrategy 10.11 introduces our new mapping capability: MicroStrategy Geospatial Services, powered by Mapbox. This enhanced map visualization is available for dossiers on all interfaces including MicroStrategy Desktop, Workstation, Web and Library (Mobile included). With MicroStrategy Geospatial Services, MicroStrategy now offers advanced geospatial analytics features that allow users to get more out of their location data. This new feature is available in addition to the out-of-the-box ESRI maps. MicroStrategy Geospatial Services allows users to: Plot polygon shapes for most countries, down to the zip code level Perform powerful interaction between layers (progressively hide or show data layers as zoom levels change) Identify and resolve location name conflicts Add thresholds to data points, size markers for metrics, and color by for both attributes and metrics Fine tune clustering behavior when aggregating data on a ma...

RunningSum calculation only on the metric subtotal in MicroStrategy

RunningSum calculation only on the metric subtotal in MicroStrategy Here are the series of steps to setup report objects in which metrics and subtotals so only the subtotal field will contain the RunningSum and the regular metric values will be standard sum values . 1) Create Metric 1 which is the sum of the fact that is to be in the columns. 2) Create Metric2 as the RunningSum of Metric1. NOTE: The sortby parameter for the RunningSum should be set to whichever attribute you want the report sorted by. 3) Create Metric3 as Metric1 + (Metric2 x 0) 4) Create a new subtotal called "Max" which is defined as Max() 5) On the Subtotals/Aggregation tab for Metric 3, set the Total subtotal function to be "Max" and select the check box for "Allow Smart Metric" 6) Create the desired report and place the 3 metrics on the report. NOTE: Only Metric3 is required on the gri...

Stages in MicroStrategy Report Execution Process

Stages in MicroStrategy Report Execution Process The report execution is typically a 3 step process process of the below: Query Stage Populate & Evaluate Stage Cross-tab stage Query Stage: Retrieve data from the warehouse Populate & Evaluate Stage: Fill report data for display Cross-tab Stage: Pivot and display sorting and page-by

Microstrategy Analytics

Search This Blog